JL Audio C1-690tx C1 Series 6"x9" 60W RMS (225W Peak Power Handling) 4 Ohms, 3-Way Coaxial Car Speakers (Pair)
We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 6"x9" C1 Series 3-Way Coaxial Car Speakers
- • (2) Bottom mount brackets
- • (8) 1-1/2" Screws (#8)
- • (2) 0.187" Crimpable female quick slides
- • (2) 0.110" Crimpable female quick slides
- • Owner's Manual
Why Choose JL Audio C1-690tx Full Range Car Speakers?
JL Audio C1-690tx 3-Way 6x9 Speakers for Rich, Full-Range Sound
Upgrade your vehicle with the JL Audio C1-690tx 6x9 3-way coaxial speakers and enjoy powerful midbass, detailed vocals, and crisp highs. The mineral-filled polypropylene woofer, 1-inch aluminum dome tweeter, and dedicated 3/4-inch supertweeter work together to deliver a wide, balanced soundstage for every genre of music.
Clear Highs and Smooth, Detailed Audio
The dedicated 3/4-inch aluminum supertweeter extends high-frequency response for greater detail and improved imaging. Combined with a smooth crossover design, the C1-690tx produces natural vocals, accurate instruments, and clean sound without harshness.
Easy Factory Upgrade with High Efficiency
With 60 watts RMS, 225 watts peak power handling, and 93 dB sensitivity, the JL Audio C1-690tx delivers loud, clear performance from both factory and aftermarket stereos. Its factory-friendly 6x9 design fits most OEM speaker locations, making installation quick and hassle-free.
JL Audio C1-690X vs C1-690tx vs C2-690tx | Which 6x9 Full-Range Speaker Is Best?
| JL Audio 6x9 Full-Range Speaker Comparison |
JL Audio C1-690X
6x9" C1 Series 2-Way Coaxial Speakers
BEST VALUE
- • 2-Way Coaxial Design
- • 60 Watts RMS
- • 225 Watts Peak Power
- • 4-Ohm Impedance
- • 91.5 dB Sensitivity
- • Aluminum Dome Tweeter
- • Easy Factory Replacement
- • Shallow Mounting Depth
|
JL Audio C1-690tx
6x9" C1 Series 3-Way Coaxial Speakers
BEST MID-RANGE
- • 3-Way Coaxial Design
- • 60 Watts RMS
- • 225 Watts Peak Power
- • 4-Ohm Impedance
- • 90.5 dB Sensitivity
- • Better Vocal Clarity
- • Wider Frequency Response
- • Great Daily Upgrade
|
JL Audio C2-690tx
6x9" C2 Series Premium 3-Way Coaxial Speakers
BEST OVERALL
- • Premium 3-Way Coaxial Design
- • 70 Watts RMS
- • 225 Watts Peak Power
- • 4-Ohm Impedance
- • Silk Dome Tweeters
- • Smooth, Detailed Highs
- • Highest Overall Sound Quality
- • Ideal for Amplified Systems
|
JL Audio C1-690tx Recommended Amplifiers | Best 4-Channel Amp Pairing for Maximum Clarity & Speaker Performance
JL Audio C1-690tx Amplifier Matching Guide
Best 4-Channel Amplifiers for Cleaner Sound, Improved Dynamics & Maximum Speaker Performance
Amplifier Matching Overview
C1-690tx Power Rating: 60W RMS (225W Peak)
Speaker Configuration: 6x9" 3-Way Coaxial • 4 Ohms
Ideal Amp Range: 50W – 100W RMS per Channel @ 4Ω
Goal: Improved clarity, stronger midbass, cleaner vocals, and distortion-free playback.
Best Setup: Quality 4-channel Class-D amplifier with clean headroom.
Top Recommended Amplifiers for JL Audio C1-690tx
JL Audio JD400/4: Best overall match – delivers 75W RMS per channel for excellent headroom, outstanding sound quality, and reliable everyday performance.
JL Audio RD400/4: Premium upgrade – higher-end Class-D amplifier with exceptional efficiency, low distortion, and excellent detail for audiophile-quality systems.
JL Audio JD500/5: Best complete system – powers the C1-690tx while providing a dedicated subwoofer channel for a balanced full-range audio system.
JL Audio MX280/4: Best compact option – 70W RMS per channel in a compact chassis, ideal when installation space is limited.
Gain & Tuning Recommendations
Gain Setting: Set amplifier gain properly using an oscilloscope, distortion detector, or multimeter method to prevent clipping.
High-Pass Filter (HPF): 80Hz – 100Hz for improved midbass and increased speaker longevity.
Bass Boost: OFF for the cleanest and most accurate sound reproduction.
Crossover Mode: High-Pass when using a subwoofer; Full Range if no subwoofer is installed.
EQ: Begin with a flat EQ and make minor adjustments to suit your vehicle's acoustics.
System Matching Tips
Without a Subwoofer: Run the speakers full range or use a 60Hz–70Hz HPF for extra protection.
With a Subwoofer: Set the HPF between 80Hz–100Hz to improve clarity and allow the subwoofer to handle deep bass.
Power Recommendation: The C1-690tx performs best with approximately 60–75W RMS of clean amplifier power per channel.
Pro Tip: Although the JL Audio C1-690tx can be powered directly from an aftermarket head unit, adding a quality 4-channel amplifier significantly improves volume, detail, dynamics, and overall sound quality. Pairing these speakers with the JL Audio JD400/4 provides one of the best performance-to-value combinations available.
Frequently Asked Questions (FAQ)
- • Why does the sound stage feel incredibly bright, harsh, or piercing at higher volume levels?
The C1-690tx is a 3-way speaker featuring an aluminum dome tweeter and a companion supertweeter. Because these materials are highly efficient at delivering top-end detail, you may need to lower the treble or upper frequencies by 2 to 3 decibels on your radio's equalizer to smooth them out.
- • Why do these 6x9 speakers lack deep, punchy low-end bass compared to my stock factory speakers?
Factory 6x9 speakers are often designed with soft, loose suspensions that create an exaggerated, muddy bass boom. The C1-690tx utilizes a rigid, injection-molded polypropylene cone engineered for accurate mid-bass control and vocal clarity; true sub-bass requires a dedicated subwoofer.
- • Will the protruding tweeter assembly interfere with my factory door panel or rear deck grilles?
The integrated silk/aluminum dome tweeter bridge features a minimal frontal protrusion of only 0.12 inches (3 mm) beyond the basket edge. While this fits under almost all stock grills, you must verify your factory door card doesn't rest directly against the speaker rim.
- • Why am I getting severe audio distortion or clipping when turning up my factory radio?
The C1-690tx speakers are highly sensitive but require clean power. Your factory radio's internal amplifier is weak, causing it to run out of headroom and output a clipped, distorted signal at high volumes, which can easily overheat the speaker voice coils over time.
- • Do I need to buy an external crossover box or special filters to install these 3-way speakers?
No. The high-pass crossover networks for both the tweeter and supertweeter are completely integrated and built directly onto the speaker chassis. You only need to plug your factory positive and negative speaker wires straight into the main terminals.
- • Can I safely power the C1-690tx with a 100W RMS per channel aftermarket amplifier?
These speakers are rated for a maximum of 50 watts continuous RMS. Feeding them 100W RMS will cause thermal or mechanical failure unless you strictly tune down your amplifier's input gain and engage a high-pass filter (HPF) set around 60 to 80Hz.
- • Why am I hearing a physical buzzing or vibration from my rear deck shelf after installation?
The large 6x9 cone surface shifts a significant amount of air and transfers kinetic energy into the mounting deck. If screwed directly into thin rear-deck sheet metal or plastic panels without sound-damping material, it will cause heavy acoustic resonance and buzzing.
- Diameter : 6x9 Inch
- Sensitivity : 90.5 dB
- Impedance : 4 Ohm
- Frequency Response : 36-24000 Hz
- Peak Power Handling : 225 Watts
- Design : 3 Way
- RMS Power Handling : 60 Watts
Features:
- 3-Way 6"x9" Design: Woofer, tweeter, and supertweeter for a full-spectrum audio experience.
- Mineral-Filled Polypropylene Woofer: Rugged, lightweight cone delivers strong midbass and clean low frequencies.
- 1" Aluminum Edge-Driven Dome Tweeter: Provides crisp and accurate upper-frequency detail.
- 3/4" Aluminum Edge-Driven Supertweeter: Extends high-frequency response and improves sound imaging.
- Smooth Frequency Response: Natural roll-off for seamless sound transition between drivers.
- Strong Power Handling: 60W RMS / 225W peak for consistent performance.
- High Sensitivity: 93 dB at 2.83V allows strong output even with factory head units.
- Factory-Friendly Fit: Designed to work behind OEM grilles and fit in most 6"x9" openings.
Specifications:
- Speaker Size: 6"x9"
- Driver Design: 3-Way
- Woofer Design: Cone
- Woofer Material: Mineral-Filled Injection-Molded Polypropylene
- Woofer Surround: Rubber
- Tweeter Design: 1" Edge-Driven Dome
- Tweeter Material: Aluminum
- Super Tweeter Design: 3/4" Edge-Driven Dome
- Super Tweeter Material: Aluminum
- Impedance: 4 Ω
- Weather-Resistant: No
- Grilles Included: No
- Sensitivity (1W/1m): 90.5 dB
- Sensitivity at 2.83V: 93 dB
- Frequency Response: 36 – 24,000 Hz
- Maximum RMS Wattage: 60 W
- Peak Power Handling: 225 W
- Top-Mount Depth: 3-1/8"
- Bottom-Mount Depth: 3-15/16"
- Cutout Diameter: N/A
- Mounting Height: 0.777"
- Frame Width: 6.407"
- Frame Length: 9.335"
- UPC: 699440990479
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
great product!
-
I'm using a amp, 75 watts each, to power these speakers. They're real tough, and from the lows to the highs, they're totally great for a 6x9!
-
These 6x9s got some nice tight lows and the mids is warm and exceptional. The supertweeter adds more definition for the highs, making them brighter crazy sound quality coming from these speakers. Excellent value for the money.
-
Love the treble coming from the 3-way design. Great bass too. One of the best 6x9s I’ve ever owned. Always trusts JL Audio to deliver the best sound from their speakers.
